Stuart H
-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Stuart H
-
-
-
sorry but car wont see much north of 450whp without further mods like replacing actuators and uprating fuel system new exhaust and new ems. love the sleeper look mine is similar just lower and more support mods done to it. hope you sell it. let me know how much you get with that power id see it as a daily no problem! hardware in the motor can see much more. what mm rad does it have?
Thank you for your good comments:)
She has got tones of more tourqe and BHP to offer. The fuel system has been upgraded. Uni Q2 chip, map sensor, new lambda sensors, remap will produce 540BHP with 500ft/lb of torque(still safe). There is always a posibilty to install a stand alone system. I would probably go for it if the Z was for track use only. I have driven 600BHP 350Z. It was insane ;)and dangerous. Where my Z is at the moment power wise just about on the limit of traction/safe. Very very smooth power delivery, mid RPM responce is just incredible.
-
Try Phil @ archenemy http://www.archenemy.co.uk/?page_id=9.
Phil's work is amaizing! He has done arches on my Z.
-
Hi All,
Has any one got a spare mint rear Rays 18' alloy wheel? This morning on the way to work I have managed to curb one of my rear alloy wheels- I love the ice and snow.
Please post here if you have got one for sale.
Many thanks,
Stuart
-
I didn't mention before:
I have all the parts to put the Z back to OEM ( manifolds, cats, intake, injectors,ect)The OEM parts are included in the sale.
Also you will get full service history, receipts for all the parts used in the build and tons of Dyno shoot printouts.
-
Was chatting to Joey Wong about your car tonight mate, said he knows / knew you. Sounds like a beast of a car.
Yes I am good friends with Joey.
Saturday we can go for a drive if you are in the area
-
I am open to sensible offers, seriously this car will blow your mind
-
Thank you for all the comments constructive or otherwise.
You need to actually drive the car to appreciate it. The mid rpm response is incredible. Forged bullet proof cosworth engine combined with the APS twins bring fantastic results and always puts a smile on my face every time i drive the car. You can't compare my Z with Envys Z. I went for reliability and decent HP figures as opposed to stock cast engine bling bling.
Z4M, and RS4 are not even close with Hp and torque figures. Trust me z4m or an OEM RS4 are gutless and boring.
Power and torque wise the cars are miles behind.
Current HP the Z is set up to produce is more than adequate for street use.Any more than that becomes dangerous and unusable on road.(anyone that has actually driven a car with this kind of HP will understand this)You can easy remap the car it will produce 550BHP with around 500ft/lb but for me current set up is enough.
I have owned 800 BHP Supra prior to the Z so I should know.
A few more facts about the car:
Chassis done 25K forged engine done 15k
Any inspection welcome, the car is like new inside and out.
-
Hi all,
I don't have enough posts to post this through trading post.
I hope I'm not posting this in the wrong section, however I'm not selling through this website, just advertising on Ebay.
I still do not know 100% if I want to do this:(
-
-
Ohh and I should have said earlier I have fitted Carbonetics triple carbon clutch last week. So the next step is the new chip and remap.
The clutch pedal feels a lot heavier but I must admit it is very smooth in traffic.
-
I have been quoted 1000 GBP for Q2 chip + all required parts supplied fitted and mapped. The tuner advised that we should keep the power around 550bhp with 500 ft/lb. Keep it safe and reliable.
-
It is so cheap
-
If they were 19 inch I would have had them of you.
Good luck with the sale!
-
Welcome,
Enjoy the Z
-
Stunning!!!
-
Any updates on the syvecs???
-
Any more reviews???
-
They do look stunning in full polish!
-
Any chance you can specify offsets and tyre sizes please?
-
These are my ES 2.2.2
Stunning!!!
What offset are they?
-
Hi guys,
Spotted this on eBay today.
Check it out looks brand new Y pipe
-
Tasty wheels
-
i love this look
what width and offset are you running?
Black rims are growing in my eyes, more and more!
I'm interested to see what widths and offsets are you running?
Twin Turbo Z
in Spotted on Ebay or Other
Posted
The car has been sold:(
Thank you for all the interest and good comments.