Jump to content

yetijohn

Members
  • Posts

    22
  • Joined

  • Last visited

Posts posted by yetijohn

  1. Hi. Ran a test on Torque App and this popped up. Just wondered if anyone knows what it is ?

    Reason for the test was I've had a few issues with Emission's. About 2 years ago the EML came on. It was either the 4030 or 4020 code so I had it looked at and decided to change an 02. This seemed ok but then the EML came back on with the same code. So I bought an OBD reader & cleared the code myself. It hasn't returned. However... the car has since had trouble going through its MOT on emissions.

    Car drives without fault but its kinda bugging me. My thinking is if there's an issue then surely the EML would come on ? I know it could just be the Cats or an O2 sensor & I've used Cataclean before each test.

     

    Thanks

     

     

    post-17262-0-24656900-1442765666_thumb.png

  2. Fitted some hubcentric spacers today (20,25mm) with my OEM Rays & one of my Lockers bottomed out & exploded upon tightening. Any suggestions on longer/open lockers ?

  3. Had the P0430 (Catalyst System Efficiency Below Threshold Bank 2) code pop up so replaced the rear O2 on bank 2 then cleared the EML. After a bit of driving the EML came back on & had it read again & now I'm getting the P1147 code (Heated Oxygen Sensor 2 Maximum Voltage Monitoring Bank 1) Just wondered if its moaning because Bank 2 has the new sensor ?

  4. Ok thanks. I have the 4030 code on bank 2 and have just replaced the O2 sensor but the lights come back on again. So maybe I need a cat ? It's goin the garage on Monday so hopefully i'll know either way. I'll be in touch if it's cat related. Cheers dude

  5. Cheers. I've had a look around online and have seen a few suggestions. Just thought I'd ask directly on here in case there was one common part that has solved the problem.

  6. Hi. Got the 4030 code showing and am wondering what solved it for other (if any) people. Car runs fine. I know it could be O2 sensors or the Cat (hope not). So any info would be greatly appreciated. Thanks

  7. Hi. Got a rattling/ticking noise coming from under the drivers foot well carpet. When I push down on the carpet in a certain place it stops. The only thing I've found is there's a bracket underneath holding fuel or brake lines and when I pressed it the noise stopped. Anybody else had this issue ?

×
×
  • Create New...