ho02pey90
-
Posts
68 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ho02pey90
-
-
Hi guys I'm having trouble getting the bolts of the master cylinder on the inside of the dash could anyone give me some advice on getting them off, iv removed the trim on the bottom of the dash and removed the split pin on the clutch pedal.
Thanks in advance 😃
-
What are the other 3 wheels? Standard or after market?
Seems logical it is that though
They are the 18inch 350z rays mate
-
Hi guys wasnt sure where to post this and iv had a look through the forum and cant find much info.
I damaged my front right hand side alloy a couple of weeks ago and iv had the spare wheel on since, i havent done much driving just when esential. basically after about 5 minutes driving the traction control and abs lights come on and i lose the abs and traction. if i turn the ignition off an on it dissapears again. does anyone know if this could just be becaue i have my spare wheel on it is the one that come with the Z.
Many thanks!
-
Bump!
-
Is it a 19" Rays alloy your looking for, for the 370Z? I have two spare.
sorry mate its the 18inch for the 350z
-
I am looking for a single Rays alloy wheel 18inch for the 350z for the front, not bothered if the paint is bad or coroded as i will be painting.
Thanks!
Andrew
-
Bump everything still available price drop on the wheels
-
i have a set for sale at the moment, 2 are brand new never been fitted to the car check out the item on ebay
http://www.ebay.co.uk/itm/111114578744?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
-
am i rite in believing the hole exhaust is stainless steel ?
-
i installed a pioneer double din head-unit in my Z last year and had major problems with the loudness, its a problem with the signal being sent to the bose amp from the head-unit. some people install a signal booster but i had problems fitting it behind the head-unit so i gave up in the end haha, all i use now is the bose head-unit with the iPod hack, cant go wrong as i use spotify on my phone and just plug it in sounds pretty good also!
-
Hi does anyone have any contact information for this member as i need to contact him its really important any information would be a great help.
Many thanks
Andrew Hope
-
i am looking for a 350z y pipe. I live in sunderland which is located in the north east or england.
Many thanks
Andrew!
-
for sale is 2 brand new oem 350z alloy wheels and 1 refurbed and one in reasonable condition, got the new wheels through insurance. also forsale is 2 rear lights original parts.
Wheels £200 for set of 4 (2 new, i refurb, i reasonable condition)
Lights £40
i am located in Sunderland please message me regarding postage and i can get you a price.
Andrew
wheel what is in reasonable condition
refurbed wheel
Brand new wheel never been on car
-
At least you did in under cover!
I thought mine was good when I did it last summer out doors.
But when I got it in the shade I saw small white specks along the side skirts and bottom of both bumpers.
A combination of my poor eyesight and the bright sun resulted in me not polishing off very well.
Mind you it did not help being a silver car.
You have done well.
its a very time consuming job mate you can spend 12 hours easy detailing your car if you want to get it perfect, its all about just taking your time and going over areas twice to make sure you haven't missed anything
I spent 5 days lol
hahah that is some dedication!!
-
At least you did in under cover!
I thought mine was good when I did it last summer out doors.
But when I got it in the shade I saw small white specks along the side skirts and bottom of both bumpers.
A combination of my poor eyesight and the bright sun resulted in me not polishing off very well.
Mind you it did not help being a silver car.
You have done well.
its a very time consuming job mate you can spend 12 hours easy detailing your car if you want to get it perfect, its all about just taking your time and going over areas twice to make sure you haven't missed anything
-
would you take £350 for the coilovers delivered ?
-
Good work, were you using an abrasive type mopping polish? then sealing after with a wax? I've got a polisher with about 15 different heads and mainly use the White spongy one "king barney" eBay special fr Germany , they give you some extras like shampoos sponges etc , in fact there german car shampoo is the best I have ever used, the polishers are well worth it.
i used the meguairs paint cleaner then then the meguairs polish then sealed it off with the wax mate, i used the yellow polishing foam pad to clean and polish the paint, then used a black buffing pad to apply the wax
-
Looks like a job well done, but i'm going to take a hacksaw to your aerial
hahaha need to get a new one!
-
Fantastic results
Now all you need to add to the regime is a snow foam lance
just been looking at these mate going to buy one! theres a one you can get that attaches to the karcher pressure washers for £45 gonna get that one
-
cracking job! Looks good. How did you find using the machine polisher for the first time? thinking of getting one as well. Is that a da one?
yea i had no problems with it, meguiars have a video on how to use it and its pretty strait forward would recommend getting one
-
Are the coil overs sold now ?
-
Sshwing! Shame to drive it now, just use it as a driveway trophy for a few days...
Im driving up to scotland from sunderland tomorrow so the cars gonna get manky! but should be able to give it a quick wash when i get back and it will be shining hopefully the wax does its job properly!
that looks amazing, the black is so good
washed mine the other day, bird sh!t across the roof inside about 10 minutes, I was so pleased it was just a quick wash and not the full detail - I'd have been screwin'
haha aww nightmare mate! yea we did it in my mates garage incase of birds or if it started to rain! haha
-
Love it! And i thought i was a bit anal when it came to cleaning
haha its amazing how much you can spend on cleaning products!!!
-
once all cleaned i drove up and down the street to get most of the water off then dried with meguiars micro fibre towels
:lol:
love this bit
good job though
haha it was just to get all the loose water out of the tight spaces
Back box wanted
in Wanted
Posted
Hi guys looking for a back box for my 350z just standard would be fine in good condition (no rattles from baffles, no holes,decent connection to mid section)
Pick up or postage
I live in sunderland in the north east of England
Many thanks!
Andrew