walt350z

hi all

about to start fitting these shocks with tein springs.what do I transfer from the old shocks on the rear does the whole top mount with numbers 1-6 in the suspension diagram in the manual transfer over and on the front does 1 and 3 get transferred over

cheers

suspension is past its best so needs replaced. so what I want is the same comfort and handling with a drop of 20-30m

cheers

20-30mm

hi all

looking to upgrade suspension on a 03gt but don't want coilovers . was looking at bilstein b12 or koni ssk kits. anybody had these and are they any good.

cheers

hi what size flare nut spanner do you need to replace brake pipes on a z. cheers

what software would I need to get the fault code for the abs. I have a elm327 interface cable but the software only does the engine

was ok before the work. had a look today and the bracket on the driver side wheel sensor looked damaged so fixed it put it back and its still the same

hi. just done the banana arms and that's sorted but noticed that both brake discs on the front and on the inside surface had a lot of rust on them. the brake pads were very tight and hard to get out so cleaned everything up so there ok now and checked the 4 pistons moved freely and there ok and now all pads are contacting the discs. the thing is when I took it for a test drive the abs light stayed on and the esp was on telling me the esp was off and the light with the car symbol and the line was on, checked brake fluid and that's on the max. don't know what to try next any ideas would be appreciated. cheers

hi, i am from alloa to, must be a alloa thing just got a warning on my brake pipes at the mot. how did you get on with making your own ones up

Hi

read the posts about this problem,so done the test and came up with 10 slow.3 fast.4 fast.10 fast flashing lights,will this mean the code is 0340 CMP (Cam Shaft Position) Sensor (Phase is this bad or an easy fix

cheers,

Walt

hi all

would like to know if you can get a bike rake for the 350z

cheers

walt