Jump to content

*** TORQEN *** 370z v2 & 350z v2 Z-SPEED Aluminium undertrays


Adrian@TORQEN

Recommended Posts

370z v2

 

These trays not only serve as a means of keeping road debris and grim out of the engine bay, but they also play a vital role in the aerodynamics and cooling of the car by keeping air flowing in the proper direction.

 

The 370z V2 comes with more clearance for deeper oil pans, oil pan spacers and larger aftermarket sway bars.

 

They also come with easy access door for quick painless oil and filter service, the garage servicing your will not have to take off the entire undertray and fit back all the bolts to change your oil. The DIY guys will waste much less time also, 2 bolts and the door comes off with plenty of access to remove filter and drain plug.

 

The also come with a drain hole for the coolant drain.

 

All new mounting hardware is included!

 

 

350z v2

 

V2 features added vents to help hot air escape from the engine compartment and gives more clearance for deeper oil pans and bigger sway bars.

 

 

The under shrouds will fit all 2003-2009 350Z with stock front bumper and should fit any bumper that follows the OEM under shroud bolts holes.

 

These will help give the lower front bumper much more rigidity also. As you probably know already, running without the shield in place at high speeds can do serious damage to the front bumper as it will droop down and can rip apart.

 

With the integrated oil change access door, all you have to do is remove 2 bolts and you have ample room to get to the oil filter and drain plug. Weight on the entire piece is 4.5lbs, the plastic OEM shield for reference weighs in at a bit over 3lbs. So, very light weight and a lot more protection.

 

All new mounting hardware is included!

 

Price: £160

 

2015-04-28_23-08-06.jpeg

 

2015-04-28_23-08-44.jpeg

 

2015-04-28_23-09-24.jpeg

 

2015-04-28_23-12-40.jpeg

Edited by octet@TORQEN
Link to comment
Share on other sites

Ok thanks ....... I hope to get my car back this Friday if all goes well with mapping . Ill get it back and go from there . Think this would be good for me to protect it all under there .

 

Frozen boost fitted and cooler fitted ( with alot of custom brackets ) , fuel return had to have alot of custom bits made to fit properly .... But getting there now ! Base map should be on ..... Tune tommorrow :)

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...