Jump to content

350z with 370z alloys, lowering help


Tuck

Recommended Posts

So I've been specing up lowering springs as I rarely get on the track with my cars, so after researching the forum the choice is between eibach (30mm) and Tein (17mmF/14mmR) and after looking at other peoples zeds I'm inclined to go with the eibach (a very nice price supplied by Ewan at Clarks) the only problem I have is that after measuring arch gap standard (approx 50mm front & 35mm Front) with the 370z alloys (19') is that the front is going to be very close to the arches with spacers fitted! Does anyone have pictures of thier 350 on 19s with either spring fitted? I've scoured the forum but only found pictures with the standard 18s

Edited by Tuck
Link to comment
Share on other sites

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

 

 

Sent from my iPhone using Tapatalk

 

Tyres are standard for a 370z 245/40/19 front and 275/35/19 rears

 

Sure? That's the sizes costco Michelin gave me for a 370z... but then again it is costco

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

 

 

Sent from my iPhone using Tapatalk

 

Tyres are standard for a 370z 245/40/19 front and 275/35/19 rears

 

Sure? That's the sizes costco Michelin gave me for a 370z... but then again it is costco

 

 

Sent from my iPhone using Tapatalk

 

Positive

Link to comment
Share on other sites

Tyres are standard for a 370z 245/35/19 front and 275/35/19 rears

 

 

Sent from my iPhone using Tapatalk

 

Tyres are standard for a 370z 245/40/19 front and 275/35/19 rears

 

Sure? That's the sizes costco Michelin gave me for a 370z... but then again it is costco

 

 

Sent from my iPhone using Tapatalk

 

Okay cheers, I'll bare that in mind as the dealer has fitted a lovely set of ditchfinders to the front. But the 35 side wall would be shorter so that would fill the gap even more than it already does!

 

Positive

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Pm Keyser or Buster on here I think they will know the answer ;)

 

Buster is the tyre size guru - but he is away at the moment - try a PM he may still pick them up :)

Link to comment
Share on other sites

Pm Keyser or Buster on here I think they will know the answer ;)

 

Buster is the tyre size guru - but he is away at the moment - try a PM he may still pick them up :)

 

Cheers I'll fire him a pm

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

IMG_20131011_122341_zps91adf31d.jpg

 

 

IMG_20131011_115843_zpsb81f9fb0.jpg

 

I had a slight rub on full lock but nothing serious and I had to tuck the outer arch a tiny bit in the middle but it was so slight I did it by hand.

 

Is that with eibach springs yeah? I'm looking to put spacers on too but I'm thinking it may rub quite a bit 😠even with the made up tyre size they have fitted

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Oh dear, fitted the tein s springs at the weekend and some 25mm eibach spacers and the rear and might of overdone it with the spacers! Sat waaay to far out of the arches to be drivable!

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...