Jump to content

My Blue Bodgemobile (04 DE)


autorune

Recommended Posts

Ok guys so some might have seen me floating around a bit after buying the blue Z from another member. So, I still haven't really driven it yet as the clutch went after 20 minutes of ownership :D So I got the parts pretty quick and was waiting for a friends to clear out some space in their unit so we can crack on. Thank the heavens they did, as you'll see why it'd have been a nightmare in an actual garage lol. This is basically starting off as a big rant but it'll be more of a build thread as it (hopefully) progresses.

 

200266196_817095085849634_19450117475488452_n.jpeg.d8d6959958807c39af3f85d06d8dc390.jpeg

 

To start with, the rust. Oh, the rust! We had to grind and drill every exhaust bolt that had to come out. Not a surprise given its age and the fact its spent most of its life up north I guess?

 

215374723_305763427914065_8863804625682007331_n.jpeg.4f4656205b5d3934d1c7325d5a92d5ab.jpeg216275775_553907168946011_2356862766929441218_n.jpeg.a9c1289f32a145e63325d79151e12325.jpeg216177087_493229621784066_2281817308656914942_n.jpeg.753700d59b5505501db1c232d4377be9.jpeg

 

Anyway, after getting the box dropped and old bits out (my days, the friction plate was down to the rivets and had dug a ditch in the pressure plate and flywheel lol) the pilot bushing was stuck in the hole. It was already getting late so instead of using the bread trick my friend with the steady hand carefully chiselled it out. Painful to watch but probably saved a day... Had the damn car almost a month and haven't driven it yet! Kit didn't come with a new one either but luckily same friend had a couple spares from his S15 (thanks Nissan for using generic parts across cars).  Anyway, now to get it back together.

 

214550160_783455419007794_1861069750728763071_n.jpeg.156be5bc15b6b130cc6de772b3cb725b.jpeg218077193_1490427021312077_6798152133437321242_n.jpeg.b2bb34532a58190dbccfcf845c0cdf6b.jpeg216235864_2575396066089290_2777202053804366557_n.jpeg.874c15d4189a84d7a8efc07837d4aeae.jpeg

Snapchat-1318214973.jpeg.f73c66a88330b993523f76c358756287.jpegSnapchat-1451652473.jpeg.d8103bb9c65683838a797cc8e38b8cd2.jpeg

 

As a note, dowels on the flywheel were a bit more snug than OEM so we had to torque it several times to ensure it was seated correctly. Niceeeee.

 

Next up, getting the box back in. Wiggle wiggle and more wiggle. Nout. Turns out using the wack-ass "universal" alignment tool didn't even get close to aligned! Luckily pilot bushing still OK. Ended up getting the box and propshaft on the following day but oh no it doesn't end there. 

 

Nope. No siree. The exhaust needs to go back on now. I really have some awesome mates here. Turns out the Y pipe is from Toyosport and the backbox is Japspeed. For whatever reason, there was a massive gap filled by two spacers with no gaskets lol. So aforementioned friend actually got the welder out and extended the Y pipe by exactly enough to make a snug fit. Now time to wire brush all the flanges and get the exhaust in. Well, thankfully we thought ahead here and got gaskets ready. And gun gum for good measure. Well, we actually ran out of bolts so ended up whipping up some by welding nuts to some freshly threaded stems. Covered both sides of the flange in gun gum and sent it.

 

218410612_142347544687639_722547599996556312_n.jpeg.c3c66b9ceeba9d210fe72009f64ceb30.jpeg

 

First start, no blowing which is awesome and its time to move it out of the unit to idle for a bit and cure the gun gum. Well, that went fine, clutch felt lovely and moved it out to idle. Then, went to test drive. Clutch in, go to hit R and... won't go into gear. Pedal feels light and lags behind my foot a bit. Get a look under, actuation isn't quite right. Mole gripped the clutch line by the slave and the pedal went rock solid, slave confirmed I guess. Got a kit (new slave and braided line) ordered from Horsham now but God damn I just wanna drive it lmao. That'll be on in a few days I hope so maybe I'll get some time in the sun before it chucks it down this weekend 🤞

 


Also, to balance out all the BS above, the interior is lovely, aftermarket sound system is pretty good too. Handles like its on rails compared to any other car I've owned (well, from the short time I got driving it anyway). No weird or dodgy noises/vibrations. Still feel like I scored a bargain despite the issues tbh.

 

To answer a couple possible questions:

  • I live almost at the south coast, got the Z transported down from Scotland "sold as seen" so its on me really and PO had no reason to expect the clutch would go that soon, however, he offered to put a couple hundred towards the clutch which is f***ing awesome given he had no obligation to do so! Other than the clutch issue everything was more or less as expected so no big deal really. Happy with the purchase regardless.
  • I eventually plan to replace the exhaust with test pipes and a nice new SS system, but am a bit concerned about the (also rusty) bolts on the top side of the cats and the idea of having to get new headers makes me shudder.
  • I get that I should be prepared for maintenance costs but god damn not so much so soon haha. Next course of action really is to get a de-rust under the car and redo as much undercoating as possible and replace some of the more accessible bits before they get real bad.
  • If you're wondering, I went with a Fidanza SMF and Exedy clutch

 

To do:

  • Fit new slave/braided line and bleed
  • Replace exhaust system, probably when it starts blowing again (Sell the cats to fund it as well probably)
  • Replace PAS lines as they're starting to become porous
  • Rear tyres getting towards EOL but will probably replace the lot with PS4s.
  • De-rust and re-undercoat before it becomes structural
  • Figure out why fuel gauge is poo (I understand this is a business-as-usual issue)
  • Sort out the minor arch bubbles before they develop
  • De-cloud the headlights
Edited by autorune
Link to comment
Share on other sites

Finally back together, new slave in. What a pain to bleed it was (Yes, we followed FSM process lmao)! Obviously taking it easy for the first few hundred to break the clutch in but holy cow does it run :D 

 

The only downside is the union nut from the hardline to attach the flexi was so rusted that even a line wrench and WD40 ended up rounding it off. That being said, we used the original flexi. I know, bad idea but it'll do until I can sort out an alternative, probably thinking of replacing the whole system with braided SS flexi similar to what you'd see on some MX-5s. If anyone's done this before please PM me and let me know how it is!

 

https://www.youtube.com/watch?v=VS1aJ_wel8o

 

Of course, it has the SMF rattle but no biggie. Fair trade-off for how rev happy it is!

Edited by autorune
Link to comment
Share on other sites

10 minutes ago, ShortPaul said:

Hi and welcome from Bristol, sounds like your having a nightmare with the zed, sounds like your getting the better of the issues 😁

Cheers lad, thankfully got some amazing mates, couldn't do it alone! 

 

Doesn't compare to my old Golf mk4 I bought in limp mode which had something break seemingly every week lmao. Took full set of vac lines, brakes, radiator/coolant, coolant temp sensor, three sumps (my fault for going low lmao), turbo oil feed, crank sprocket (bolts sheared???), clutch/smf, all round suspension and several window regulators. Only had it less than a year before the engine blew due to shoddy workmanship (still no idea if was me or Halfords but they left oil all over the engine bay from a timing belt change soooo) 😅

Link to comment
Share on other sites

Glad to hear you've got it back together, hopefully you can start actually enjoying it now B)

 

Shame you've had to do such a big job so early into your ownership but at least you've got peace of mind that it's done now! 

Link to comment
Share on other sites

  • 3 weeks later...

What YOU see as far from perfect, 99.9% of the population will be admiring saying that the car looks brand newB).

When I got my first car I loved waxing it. I didn't know anything about detailing and just thought Wax/polish was all the same and made it bead in the rain.

I don't know whether to thank or curse the friend that showed me what swirls were and then introduce me to detailingworld coz now what has been seen cannot be unseen:doh:

Link to comment
Share on other sites

1 hour ago, HEADPHONES said:

What YOU see as far from perfect, 99.9% of the population will be admiring saying that the car looks brand newB).

When I got my first car I loved waxing it. I didn't know anything about detailing and just thought Wax/polish was all the same and made it bead in the rain.

I don't know whether to thank or curse the friend that showed me what swirls were and then introduce me to detailingworld coz now what has been seen cannot be unseen:doh:

That is very true - definitely show quality compared to my dad's old Ibiza thats lost 90% of its clearcoat lol. I thought the same with previous cars and had this idea after my friend showed me the difference on his A4. Scratches aside there were sunscreen marks all over the place and understood a good cut+polish would get those out. Headlights were also pretty bad so this also sorted those out for the most part - time will tell how long it lasts but hopefully the ceramic spray stuff will keep em together.

 

Not sure if its a trick of the lighting but in all fairness it looks like I've taken a lot of the shallow scratches out, paint definitely less hazy :D Its true though I can't unsee it on any car anymore haha

 

Before

235793610_1497746750577515_5668097894434418665_n.jpeg.aaf0fe26d0147a93b47058d75503923a.jpeg

After

233622778_416973573083201_7261742406614539157_n.jpeg.ff830e870f7f0d41d874d2ce391ad676.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...