Jump to content

From Wash Jets Not Working (Rear Works)


Lynchyy

Recommended Posts

Trace the pipe back from the bonnet spray jets to under the front windscreen cowl.  There will be a Y shaped 1 way valve which gets blocked.  I replaced mine with a Bic Biro pen lid for a fe months and it worked perfectly.

Link to comment
Share on other sites

If you take the T pipes off the wipers, do you still get water out of them?

 

When I refurbed my wipers the jets packed up, turns out they were full of crud so I spent a whole afternoon (really!) Pumping hit water through them with a syringe, blowing them through with compressed air and digging crud out with a stripped down paperclip :#1:

 

Worked perfectly after that

Link to comment
Share on other sites

Thanks for all the info. Looks like its a pipe blockage from the pump to the front screen, as ive swapped over the rear and front tube at the motor side (so technically when i press the rear, it should now operate the front) but it still doesnt work. Tried to blow compressed air back through the jet and no bubbling at the tank. I will buy from wash piping and re-route i think.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...