Jump to content

Passenger window not working. Help!


TiN TiN

Recommended Posts

The passenger window isn't working. It's not going up and down when opening/closing the door either. The window lock switch is not pressed. It doesn't open or close using the switch from either side.

 

I've just changed the window motor, and it's still not working. 

 

I've opened the switch, and it doesn't seem to be in a good state, but would this stop the driver's side switch from working? 

 

What else could it be?

DSC_5161.JPG

Link to comment
Share on other sites

38 minutes ago, ZMANALEX said:

Bench test the motors off a direct 12volt supply.

 

Perhaps they are both bad or perhaps the fault lies elsewhere.

If you were to give someone a 10 second lesson on how to do this......

Link to comment
Share on other sites

10 hours ago, TiN TiN said:

If you were to give someone a 10 second lesson on how to do this......

Firstly, hook up your meter and check that the motors are getting a live feed.

 

When you are there, run a 12v feed and ground to the motor.

 

If the motor is good the motor will operate.

 

 

Link to comment
Share on other sites

 

On 18/04/2020 at 21:01, TiN TiN said:

've opened the switch, and it doesn't seem to be in a good state, but would this stop the driver's side switch from working?

Definitely on mine the passenger window wouldn't work unless both switches were connected...

  • Like 1
Link to comment
Share on other sites

1 hour ago, Ben–350Z said:

 

Definitely on mine the passenger window wouldn't work unless both switches were connected...

Thanks, that's helpful. I suspect it's the passenger side switch. Do you know where the best place to buy these is?

Link to comment
Share on other sites

1 hour ago, ZMANALEX said:

Are these the switches that you are after?

 

 

 

 

DSCF6903.JPG

DSCF6904.JPG

8 hours ago, ShortPaul said:

:pmzmanalex: he will probably have one if not ebay 

 

6 hours ago, Ben–350Z said:

Beat me to it :lol:

@ZMANALEX

 

Yeah, just the passenger side, and just the bit that says G on it. Is it working? How much do you want for it?

Link to comment
Share on other sites

11 hours ago, ZMANALEX said:

I am happy to just sell you the one switch, however, I only sell the complete switch and not just the printed circuit I am afraid.

 

Fully working when removed.

 

If you wish to purchase then just drop me a PM.

Pm'd

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...