Dolley350z Posted July 10, 2019 Share Posted July 10, 2019 In need of help. Fitting new head unit. Have an external usb lead I want to run into the card holder or cubby behind handbrake 2006 model how do I remove these 2 items. Desperate for some guidance can’t find anything on the net. Quote Link to comment Share on other sites More sharing options...
Daisyduke Posted July 10, 2019 Share Posted July 10, 2019 Dont know if 06 is majorly different. But my 05 was easy. Pull gear shift surround out and get at all the screws from there. I'm just over the bridge if you need anything. Quote Link to comment Share on other sites More sharing options...
Kryptek49 Posted July 11, 2019 Share Posted July 11, 2019 Facelifted version is pretty much the same. Pull out gear shift bit, remove the 2 uncovered screws, remove 4 screws where the heater controls are bolted in, remove 2 screws underneath the plastic clips in the cubby, pull out at the top and remove the electrics plug at the top, job done. Quote Link to comment Share on other sites More sharing options...
Payco Posted July 11, 2019 Share Posted July 11, 2019 10 minutes ago, Kryptek49 said: Facelifted version is pretty much the same. Pull out gear shift bit, remove the 2 uncovered screws, remove 4 screws where the heater controls are bolted in, remove 2 screws underneath the plastic clips in the cubby, pull out at the top and remove the electrics plug at the top, job done. As above. Not a difficult job. I did it when I have mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.