Jump to content

DB Nissan 350z GT 05'


davey_83

Recommended Posts

Its that time!!

 

1744661275_IMG_20181010_074801760_HDR2.jpg.9b60391e95c8adb0d435fcfb14e03b5c.jpg

 

Been wanting to post a build thread for ages but my car is anything but a 'build' more of a subtle upgrades diary with way to much cleaning pictures. The below details my last 12 months ish of ownership having bought my 350z in September 2015 up to the current day.

 

For a good couple years being a Nissan man (last 5 cars on the drive have been Nissans) ive wanted a 350z as it seemed a natural progression from my last car Nissan Almera GTi 99' (full bolt on and at the time the most powerful unopen'd SR20DE in the UK) 196bhp *standard is 143bhp. Chicken'd out many times but then i was kinda forced to, so began looking for a 2005 UK model in either black or grey and of course GT spec with full leathers, cruise, BOSE & the option forged RAYS wheels.

 

After agreeing in principle a cash price for a lovely black GT4 and missing out, perhaps for the best i came across this:

 

http://www.parkwaymo...Z/details/1416/

 

From what i gather this is the sales ad of my car before the owner before me, anyways he traded it into Windmill Autos in Sandy for a BMW 3 series coupe.

 

media20_zpsznjpvxdn.jpg

 

The first time i saw the car was up on a ramp being fixed, hhhmmmmm maybe not the best first impression but it also gave me a great opportunity to have a good nose underneath. This was the very first picture i took. For the age and mileage i thought it looked very tidy and in good order.

 

IMG_20150902_100056_zpsuv1wh9mq.jpg

 

The garage were diagnosing an engine oil leak, which was coming from the drivers side rocker cover gasket. From the WMA sales pictures i knew it had the common issue of the oil pressure switch being defective, as the needle was showing at max with the ignition turned on.

 

With the car up on the ramp and with the engine running, the sound of the exhaust system sounded amazing just inches above my head. However it wasn't idling great which i then couldn't stop thinking about once i noticed it. Quick chat to the mechanic working on the car and then i proceeded inside to speak with the chap i spoke with earlier on the phone.

 

Not fixed yet but once down on the floor a road test was next. This was the second 350z i had driven as i went out for a drive in one local to me just to get a flavour for it. With the issues identified and then a price pending them being fixed i left a deposit and sadly had to leave carless.

 

Few days later and the oil leak was fixed and new sensor had arrived, being an easy job to fit i headed out to go collect my car with the dollars. Got there and the gauge was now showing as no oil pressure when running, hhmmmm not good. Garage did an oil change there and then and still no oil pressure but the car drove fine and sounded great albeit with a sometimes odd idle.

 

IMG_20150902_101547_zps2sgodetu.jpg

 

This being the Saturday of JAE my plan was to go straight to the show in my new car, however it wasn't to be as the car still had issues. For the gauge matter - checking the new part code, they got sent an Air Con pressure senor instead of an oil pressure sensor? That's why the gauge was showing nowt. They ordered a genuine Nissan one even though i advised they could get it £40 cheaper from Clarkmotorsport.co.uk yet this would arrive Tuesday now at best, so again i left carless from another 3hr round trip but it was my own fault as i should have waited for the all clear instead of trying rush matters. Fair play to the garage as they said the car to their knowledge is going to leave without issue as they're putting the gold warranty on the vehicle (which i did have to use twice, more on that later) and makes no sense for it to come back a week later for more repairs - against my better judgement i purchased the 350z and took home a 7k owners handbook and file of paperwork.

 

After JAE 2015 in my 92' Nissan Sunny 1.4 *lots of fun btw, i received the call on the Wednesday to say the car was finally all ready. Prior to leaving empty handed the last time we agreed that the older brother of the family business and another driver would deliver the car to me, which at that point made sense. The following day she was home at long last it seemed, with its new and BEST owner its ever had.

 

IMG_20150917_172126_zpsm3eczcxk.jpg

 

The daily/grocery getter for all you classic lovers. My ride overnight went up by 2100cc nor bad.

 

11895067_10153578969027433_9130833372713226611_o_zpsfhuex8sc.jpg

 

 

More to come and if you read all that, go to sleep and if you're still reading....................... STOP it.

David

Edited by davey_83
  • Like 4
Link to comment
Share on other sites

First thing i changed on the car was the awful number plates, for fresh GB ones and i think it makes her look younger :D

 

oh no, poor sunny pushed forward out the way.

 

IMG_20150918_163440_zpshnlwcrnb.jpg

 

 

Before

 

IMG_20150919_111824_zpskryuhh2f.jpg

 

 

After

 

IMG_20150919_112302_edit_zpssbupigwc.jpg

 

ahhhh, the little things

 

hhhhmmmm those curves

 

IMG_20150919_180033_zps5iopl3dc.jpg

 

 

With the plates showing D V A together with a booty like that, there was one name - hello Davina :yahoo:

 

and if you were still wondering.....................

 

BtaeQ9bCUAASh2i.jpg

 

David

  • Like 2
Link to comment
Share on other sites

First time filling up and she's drunk nothing else since *plenty of it mind!!

 

IMG_20151012_225105_edit_edit_zpsrulpeegr.jpg

 

 

Steering wheel was a ting bit off centre, so that had to be addressed promptly. Took her over to Tyres R Us Birmingham who did a lovely job at a very decent price too, £35 irrc and the N/S track rod needed heat putting on - no charge.

 

WP_20151024_020_zpsw54vubnk.jpg

 

 

WP_20151024_009_zpsdmdi8f9p.jpg

 

 

OK i now know i have a JAPSPEED exhaust system, fairly new at least.

 

WP_20151024_013_zps2bnkbuqp.jpg

 

 

figures :dry:

 

WP_20151024_006_zpsn4sxga1t.jpg

Link to comment
Share on other sites

A Stubby aerial from TarmacSportz of course came next, we all know what that looks like.

 

Used pair of 20mm TarmacSportz, but i wanted them silver to blend in behind the wheels.

 

IMG_20151029_223722_zps1rnltgzn.jpg

 

 

Surface keyed, masked up, primer then painted.

 

IMG_20151029_235321_zpspjiruwnx.jpg

 

 

IMG_20151030_220158_zps9vzjlhcc.jpg

 

 

Next up was a bit of adjustment for the common issue of clicking rear axle when pulling away, wanted this doing before the weekend as it was the BHP Breakfast meet over in Telford hosted @ SVM.

 

IMG_20151030_233212_zpsx1tvijce.jpg

 

 

IMG_20151031_000456_zpsgvfau8gm.jpg

 

Combined with spacer install as it just made sense while the wheels were off.

 

IMG_20151030_235644_zpsedzfej1m.jpg

 

 

10 months later and it seems to be holding up well

 

IMG_20151031_001705_zpslhqshcvr.jpg

 

While up on axle stands i gave the W brace a good coating of rust converter, which looks to reverse the chemical reaction leaving stolid steel again.

 

IMG_20151031_004506_zpsuvgcgwhn.jpg

 

 

IMG_20151031_004442_zpsxvc7n98s.jpg

 

 

Saturday morning at work for a bit of new car parking like a noob

 

IMG_20151031_115002_hdr_zpsb9z0gwlp.jpg

 

yay my stubby ffitted

 

IMG_20151031_123243_zpsuaj8zpwu.jpg

Link to comment
Share on other sites

New rear double sided number plate came loose on the one side, so stronger stuff needed.

 

#PhotoOpportunity

 

IMG_20151031_153833_edit_zps9ngeylwq.jpg

 

Following day and its off to my first car meet with the forum. Meet up with my pal Duncan for some 6 cylinder loving, DAMN that M roadster shifts!!!

 

IMG_20151101_123655_edit_zpsq9x9wzqb.jpg

 

 

IMG_20151101_080709_zpsmusz2zzd.jpg

 

 

IMG_20151101_120045_zpsk7zizyw8.jpg

 

 

After the show drover over to Shirley retail park for a couple of chip repairs before the winter.

 

IMG_20151101_140241_zpsqcpbhf9v.jpg

 

Following weekend me and the Mrs drove up to Llandudno for a romantic weekend away, which resulting in.................... :dry:

 

IMG_20151114_191340_zpspd5lmtjx.jpg

Edited by davey_83
  • Sad 1
Link to comment
Share on other sites

About an hour before the above picture i was in a Maccies waiting for the Mrs to come back from the toilet and took a picture of the interior while the car was on idle. Looking back the voltage display was showing 13.8v which i think is ok.

 

IMG_20151114_171853_zpsfmxrjvf3.jpg

 

Love Love Love the 350z clocks

 

IMG_20151114_171941_zpsre7ycres.jpg

 

Anyways the alternator stop doing what it was employed to do and in doing so took out the battery also. Had the car recovered to a Kwik Fit in the town where it stay all night as by this time it was out of hours.

 

IMG_20151115_100852_edit_zpsonzedipj.jpg

 

Warranty battery and alternator later and she's feeling good again

 

IMG_20151203_130541_zpsgreeytjb.jpg

 

 

Found out why the idle was off, can you spot the error with whoever fitted the induction kit previously?.....

 

IMG_20151203_130636_edit_zpsfwgji8fp.jpg

 

 

IMG_20151121_143027_edit_zpswwjdlz9v.jpg

 

Next up, this..............

 

IMG_20151206_095837_zpsng1xmpxt.jpg

  • Like 1
Link to comment
Share on other sites

Looks lovely and clean!

 

A bit of advice surrounding the 'W' brace rust (without wanting to come across like a smart arse). It looks like the stuff you've used is more of a gel that's supposed to dissolve rust and be washed off. What you want is some Bilt Hamber Hydrate 80; it's a 'paint' that converts rust and neutralizes it. It's the best stuff I've used for those kind of treatments.

Link to comment
Share on other sites

  • 3 weeks later...

Plenum spacer by Wasso

 

Was like a kid at Xmas, awesome bit of kit and very very well made.

 

Used the Motordyne guide which helped especially with the reassembly torque setting and sequence.

 

Difficulty level 2/5

 

 

 

 

IMG_20151206_093929_edit_zpssedltc93.jpg

 

Strut brace and engine cover off and quick orientation.

 

IMG_20151206_094111_zpsqkspzwc2.jpg

 

IMG_20151206_095331_zpsgtoxyqbp.jpg

 

Very clean underneath for 75k I thought too.

 

IMG_20151206_095837_zpsng1xmpxt.jpg

 

Torqued down in order an in stages, using the underside of the brake reservoir cover I placed the bolts down to represent the location of the bolt in situ. This provided a quick reference for fitting the new bolts as I know which length bolts went where at a glance.

 

 

IMG_20151206_101937_zpspivpyzqr.jpg

 

 

IMG_20151206_101946_zpsrroywieh.jpg

 

Run up to a car meet up Nottingham with a couple mates.

 

12001030_898827906867451_4318583495515955229_o_zpsodpbbfnp.jpg

 

 

Who said the VQ35 is bad on juice.....

 

IMG-20151004-WA0003_zpszkvejgok.jpg

 

 

Next came my B&M shift knob out of my last car, works well with the Z33.

 

IMG_20151227_092302_zpskxsdle9f.jpg

 

IMG_20151227_092247_edit_zps9g1g6zvw.jpg

Link to comment
Share on other sites

Good pal of mine goes for a Bose system with amps and sub it's not very loud. I had been looking into this on and off then decided to take the unit out and perform the Buster stereo mod to increase the sets volume.

 

Now ive since read the reason the new unit is so quiet compared to the standard HU, is that everyone turns down the OE stereo prior to removal and this is wrong as you loose the amps 'gain'. What you need to do in fact is turn the volume up *above half way at least on the OE unit prior to removal and this will then provide the amp with 'gain' ready for the aftermarket head unit?......

 

IMG_20160101_030930_zpsdfd0p24s.jpg

 

Car show miles, MFN May 2016

 

12132433_1632071527031737_972005402363421651_o_edit2_zpsnfbauqig.jpg

 

BHP Breakfast Meet the month before *iirc

 

IMG_20151116_171710_edit_zpsygx7hgfj.png

 

IMG_20151116_171554_edit_zpsyur9ddy6.png

 

Then an extender for slick gear changes

 

IMG_20160109_092519_edit_zpsbwtj4hxw.jpg

 

For that Koenigsegg CCX look and feel LOL

 

IMG_20160109_092610_edit_zpsaa3vsyse.jpg

 

Maintenance

 

IMG_20160111_182227_zps04jgrhyi.jpg

 

Now all lovely and clean

 

IMG_20160111_201233_zpsekjn3uus.png

 

Dash vent trims before and after with a quick wipe over of the interior.

 

IMG_20160124_105924_zps26632u7o.jpg

 

IMG_20160124_110621_zpsikz5zqkb.jpg

 

IMG_20160124_110741_zps1u87igri.jpg

 

IMG_20160124_110940_edit_zpspcefuhpo.jpg

 

Few days after this arrived.....

 

IMG_20160126_174125_edit_zpszsaoqh1p.jpg

  • Like 1
Link to comment
Share on other sites

Tarmac Sportz carbon combo, waited and waited in the hope Chris would have another batch B)

 

TIP - do not use the 3M tape that comes supplied, Unibond no more nails is 100% up for the job.

 

http://www.ebay.co.u...72297739&crdt=0

 

hhmmmm carbon

 

IMG_20160126_175133_zpsz4iy141a.jpg

 

on the radiator to warm prior to fitting, did it make a difference? i dunno but kinda felt right to do so.

 

IMG_20160130_142256_zpscdbxatqg.jpg

 

hhmmmm think i shot my load to soon, to which placement wasn't right on my part.

 

IMG_20160203_171108_edit_zpsaezn9g95.jpg

 

fixed

 

IMG_20160203_171414_zpswkpiosbi.jpg

 

IMG_20160203_171247_edit_zpsersnhuqx.jpg

 

Out for a drive, mpg still good - maybe i'm not driving hard enough.............

 

IMG_20160131_224829_edit_zpsusgoqxha.jpg

 

This arrived ready for false advertising

 

IMG_20160202_165124_edit_zpsxdl3ez99.jpg

 

Shortly after was dent removal time, purchased the car with a few car park dings and an outie on the bonnet.

 

IMG_20160130_113236_zps27ghpms7.jpg

 

IMG_20160130_113303_edit_zpsso38d6kt.jpg

 

where the kerb dips down huff

 

IMG_20160130_113321_edit_zpsnxxl81g1.jpg

 

Just plain annoying right............ but Darren from Dent Devils can make it like it was.

 

IMG_20160204_135341_zps1v3ycxyt.jpg

 

IMG_20160204_145623_zpssos5amal.jpg

 

dents be gone :boxing:

IMG_20160204_145730_zpsmmre54cd.jpg

 

Although the standard ride height isn't bad, it can be made better - hello Tein springs :D

 

IMG_20160220_075132_zpshbcbq4tq.jpg

 

rears first as the ride height is more offending

 

IMG_20160222_135303_zps5c7au3lt.jpg

 

IMG_20160222_133316_zpsncnfq0ln.jpg

 

IMG_20160222_135916_zps5x2ofhwb.jpg

 

IMG_20160222_133559_zpsw2kispmk.jpg

 

IMG_20160222_141821_zpsiyh9fhzq.jpg

 

Still so strange to see front hubs without driveshaft attached.

 

IMG_20160227_112212_zpslifkhvaa.jpg

 

IMG_20160227_112636_zpsfsodn22c.jpg

 

While im at it, some used Tarmac Sportz 15mm's for the front

 

IMG_20160227_092300_zpsn0kq0z80.jpg

 

The next day we're off to the second BHP breakfast meet, now held at RSV Graphics and Tints Dudley

 

IMG_20160228_085833_zpsyd4mbqsd.jpg

 

IMG_20160228_112607_edit_zps9ytickve.jpg

 

I got caught down low :lol:

 

IMG-20160228-WA004_edit_zpskpci48ks.jpg

 

I was taking this at the time

 

IMG-20160228-WA006_edit_zpshgjamvfg.jpg

 

yay carbon b post trims & dent free..................... for now, plus lowered

 

IMG-20160228-WA005_edit_zpsjm6p284i.jpg

 

Next mod install to follow shortly, any guesses.................... :yahoo:

 

IMG_20160309_165248_zpsom3m0xr4.jpg

Edited by davey_83
  • Like 1
Link to comment
Share on other sites

Cheers chap, springs have been on for circa 8 months and are fabulous - just right for a daily driver.

 

Sourced separately from two cars breakers online in an attempt to reduce costs, always a gamble but worked out well in the end *single box as i used it to store the one lamp until i found another.

 

IMG_20160309_215757_zpsrissg1jl.jpg

 

IMG_20160310_165953_zpsa2i3oj92.jpg

 

Early model 350z rear connectors needed modifying to accept the facelift lamps, i choose to modify these rather than the lamps.

 

IMG_20160310_170923_zpsuidxb7hh.jpg

 

IMG_20160310_172645_zpsqbhitgtw.jpg

 

The upgrade also provided an opportunity for cleaning ;)

#yuk

 

IMG_20160310_171959_zpstpf5fy2p.jpg

 

To this

 

IMG_20160310_172602_zpsmcarzawo.jpg

 

Chrome indicator bulbs while access was granted made sense also.

 

Before

 

IMG_20160310_172304_zpsx9ft34ms.jpg

 

After

 

IMG_20160310_173136_zps2fhvgyuq.jpg

 

IMG_20160310_165733_zpsryrddc6o.jpg

 

 

IMG_20160310_173340_zpsx2x9ws1e.jpg

 

hhhhmmmmm LED's

 

IMG_20160310_173406_zpsksimdyun.jpg

 

Rear view before and after

 

IMG_20160310_165043_edit_zpsxwpmjgfj.jpg

 

IMG_20160310_174351_edit_zpspbwf74xp.jpg

 

Looking through the service book, every March is her annual service and even though the supplying garage did an oil change prior to the sale i wanted to of course keep the service history bang up to date. Reading thought prior invoices, the previous owner as part of a major service when he first had the car paid £95 for plugs to be fitted of which £70 were parts. Decent plugs then and only 36 months ago, however then 24 months later had the plugs replaced again - of which each plug was £7 :yuck: A) cheap nasty plugs for a VQ35 B) they didnt need changing anyways. So Hybrid P2 service with oil, oil & air filters, plugs and differential oil change (went back to OE airbox at this stage, and came off the following weekend as the engine lost all its growl)

 

IMG_20160325_092030_zpslk3w5sxh.jpg

 

yuk!!

 

IMG_20160325_091711_zpsjjmhrxwn.jpg

 

IMG_20160325_092631_zpsurhjcucj.jpg

 

IMG_20160325_093004_zps7engz41i.jpg

 

hhmmmmm fresh

 

IMG_20160325_145613_zpsvfhv7x2r.jpg

 

IMG_20160312_124628_zpsy5weuknx.jpg

 

as suspected, well not cheap but i only deal in NGK B) clearly only been in the motor not very many miles either.

 

IMG_20160312_125243_zpsoci0j7op.jpg

 

Also popping a few brave pills i opted to clean out the throttle body, yes i touched the butterfly :boxing: good job too, yuk!!! clearly this had NEVER been cleaned before.

 

IMG_20160312_131236_zpswohhqk2y.jpg

 

O/S bank

 

IMG_20160312_134901_edit_zpsdhx6ld8z.jpg

 

All serviced up and looking not very presentable, but i can see to that later.

 

IMG_20160313_141102_zpsbgnmoamo.jpg

 

Time for a bath :D

 

IMG_20160402_140253_zpsnxl95ukx.jpg

 

IMG_20160402_140715_zpsvepialjk.jpg

 

IMG_20160402_160433_edit_zpskqsftnr2.jpg

  • Like 1
Link to comment
Share on other sites

Maintenance

 

Reading up on the PCV, as these can cause issues when they get gunked up purly over time - so looked to give mine a clean out.

 

Carb cleaner or similar, pliers and a 23mm spanner is all yam need

 

IMG_20160316_160250_zpsd4k9ooac.jpg

 

Cleaned inside & out

 

IMG_20160316_161101_zpslfc2hjlg.jpg

 

Engine tidy up

 

IMG_20160313_141102_zpsbgnmoamo.jpg

 

#yuk, caused by the N/S rocker cover breather hose being left off

 

IMG_20160313_141108_zpsudp9vugl.jpg

 

IMG_20160313_141335_zpsro0vgqb9.jpg

 

IMG_20160313_143038_zpsrvifeg8b.jpg

 

Much better

 

IMG_20160315_120715_zps3bkrmyff.jpg

 

I didnt know that was just old polish residue :lol:

 

IMG_20160313_180337_zpslunzp90e.jpg

 

IMG_20160315_174059_zpsltd9e4ay.jpg

 

IMG_20160315_174158_zpsulmuji6g.jpg

 

 

Nismo decals *i know :headhurt:

 

IMG_20160313_180425_zpsayodyh41.jpg

 

And relax

 

IMG_20160313_180215_zpsmffwezff.jpg

 

 

A trip over to here was next, prior to my first track session at Silverstone for JapFest B)

 

IMG_20160319_123415_zpskdrzhlxt.jpg

 

12032800_10209513753586249_8573257864887544775_o_zpsbn5p6pma.jpg

Edited by davey_83
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...