-
Posts
14,447 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ZMANALEX
-
-
Replace the pedal switch.
-
All in stock mate.
Just drop me a PM if I can help you further.
-
7 hours ago, Payco said:
Don’t think there is on most cars is there ?. Boot open light but not bonnet .
Got one on my M Sport Beemer, but not on any of the Nissans that I have owned.
- 1
-
I have no experience of the cheap Chinese impeller that you are referring to, however, it will cost more than 500 bucks for an engine rebuild if the impeller disintegrates. Do the maths.
-
In stock, Brand New, Genuine Nissan.
- 2
-
The correct way to fit the timing cover is to leave the dowels in place as they do serve a purpose.
The problem that you are having is that the front cover should be fitted before the mid-sump.
if you fit any other way then you run the risk of oil leaks from the front half moon packing immediately or in the near future.
-
2 hours ago, ROY0147 said:
First of all I have a problem with the driver's door window. I have bought a new motor and regulator, watched a few bad American vidoes on youtube and wanted to have a back up if I did try to do it myself. Even to have someone w step.ho had done this job just to talk to perhaps.
A very straightforward job, just follow the Nissan workshop manual step by step.
-
Turbo or Supercharged?
-
In stock mate and good to go same/next day:
PM received and replied to.
-
Sorry, I did not know that you had a JDM car without the Brembos.
These will have to be ordered from Nissan.
Amsterdam is showing stock so 3 days from Nissan UK
I have the shock bolt but not the caliper pins.
-
I will have all the hardware in stock.
Just let me know exactly what you require.
Where in Scotland are you?
I am in the Perth area.
-
8 hours ago, paulsx said:
Hi Alex thanks for that was hoping not to change the arm as mine has aftermarket bushes in it. How much are the arms and ball joints please?
I will send you a pm shortly with prices, however, please note that you can just replace the ball joint however it has got to be compatible with the seating cone and the arm and that is where the issues arise.
-
This is a common issue and you also have to make sure that you fit the correct size of seating cone as well.
This is what you require, plenty in stock either as singles or as a pair.
Just drop me a pm if I can help further.
-
There are various 350Z models and the air con module is model specific.
I should have fully working modules in stock so if you can PM me over the part # that you require I will check for you.
- 2
-
Plug and play, no coding required.
-
Yes mate, in stock and good to go.
-
If Ullapool is the furthest North that you are going then you will have no issues with fuel supplies.
-
Brembo calipers are in stock.
Caliper bolts are also in stock.
Just drop me a PM.
-
In stock and good to go same/next day.
Just drop me a PM if I can help further.
-
In stock and Free to good home, however you would have to remove your self.
No Rust
Click on image below to open.
-
Congratulations guys, another milestone.
- 2
-
Plenty of cranks and rods in stock if required + every other engine part imaginable.
https://www.350z-uk.com/topic/125665-loadsa-parts-for-sale-picture-heavy-now-with-prices-and-detail/
-
The intake will not provide any gains over stock.
The correct spacer may provide a slight increase in bhp and torque but only after an Uprev Tune.
- 1
-
Can't comment too much without more info or pictures, however, it sounds like your rear toe or rear camber is well out.
350Z suddenly won't start
in 350Z Technical
Posted
Yes, just bypass the switch and see how it goes.