It is currently Tue Feb 09, 2010 6:21 am

All times are UTC [ DST ]




 Page 1 of 5 [ 65 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
 Post subject: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:21 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
Hello All,

I've seen a number of threads on here talking about Carbon Fibre wraps and thought I'd just make you aware that my company offers this service at a very competitive price. RGVA have been in business for over 15years, We offer the most comprehensive range of products and services for vehicle signwriting. In fact we are the only dedicated vehicle branding company in the UK. The majority of our work is commercial vehicle signwriting but being car enthusiasts ourselves we wanted to branch out more into the domestic market and make ourselves known a little more in the enthusiast scene. Take a look at our website for more information about the company http://www.rgva.co.uk

Since telling just a few people that we are now offering Carbon Fibre wraps, word has spread and we are booking cars in for full wraps left right and center!! Some of these cars include a Porsche Carrera, a TVR T350, a Ferrari 430, Nissan GTR, Range Rover Sport.

We are also offering partial wraps for roofs, bonnets, bootlids, spoilers and interior parts.

Just to give you an idea on costs, the RS4 (Full wrap) in the pictures below would cost £1950 inc VAT. A smaller car (e.g Smart Car) would cost £950 inc VAT.
Roofs start from around £100 inc VAT, bonnets from £155 inc VAT.

Any questions please feel free to ask or just drop me a PM.

Here’s a few pictures of the wrapping process on our demo car...

The pictures don't do it justics at all, it needs to be seen in the flesh to be fully appreciated. You are welcome to come and see the car at our place in Kent, just give us a call the day before and we'll try to make sure it's not out on the road.

A finished pic (If your computers slow and can't be bothered to wait for the others to load :lol: )
Image

The process...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The finished product...

Image

Image

Image

Image

Image

Image

Image

Image


Last edited by KJ. on Thu Nov 05, 2009 11:02 am, edited 1 time in total.


_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:25 pm 
Z Veteran
User avatar

Joined: Sun Mar 16, 2008 3:56 pm
Posts: 2990
Location: KFC with Lexx and Zedrush (Birmingham)
Could we have a pic of the door open or something, I just want to see how far round the wrap goes.

Any idea on a price for a full wrap?



_________________
Image
Nismo Powered Azure Fairlady Z 303.5 bhp / 290 ft-lb torque
ESR / Nismo / Volk / Varis / Blitz / Berk / 5Zigen / PIAA / JWT / Cusco / K&W / KAD / RSW / Motordyne / Stillen / Exedy / Fujitsubo / Ferodo / Tommy Kaira / DBA / Falken / Evo-R / Fidanza / Samco / Mikalor
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:26 pm 
Z Veteran
User avatar

Joined: Mon May 19, 2008 8:07 pm
Posts: 3100
Location: South Wales
Holy sh*t what an awesome job. Never seen a full carbon wrap before. Like that a lot. :thumbs:


Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:29 pm 
Z Veteran
User avatar

Joined: Thu Jul 10, 2008 3:38 pm
Posts: 1098
Location: Dublin/Ireland
:teeth: there, my mod sorted.

How long does that take from the time I hand in my Z until I can come back and pick her up? What state does it need to be before you start wrapping it?

What warranty comes with it? Is it 'easy' to get it repaired if broken? Looks the part!

Well done! :thumbs:



_________________
I want to go fast...

Image
WHP: 265.4 / FHP: 318 (+-5% on WHP) : Torque: 318.5 lb/ft
03 JDM : Magnaflow End pipes : Custom 2.5*2 Dual from Cats : BERK racing cats
HALTECH Platinum ECU 350Z : Uprev (De-limiter & 100% throttle) : Kinetix Velocity Manifold : Apexi drop in filter
Offline
 Profile  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:31 pm 
Moderator
User avatar

Joined: Mon Apr 09, 2007 8:48 pm
Posts: 15402
Location: Lakes
PMd. :)



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:31 pm 
Z Veteran
User avatar

Joined: Mon May 05, 2008 10:41 pm
Posts: 1497
Location: WIGAN
Is the carbon only available in the matt finish?



_________________
Image
Signature design by Vale
Nismo, Volk, RSW, Gallery, 5Zigen, KW, Summit, ARC, DBA, Ferodo,Tein,Dreamcustomz,Chargespeed,Varis,Samco,Alpine,Swissvax,ESR,Envy,CS,Finerdetails.
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:34 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
IanS16 wrote:
Could we have a pic of the door open or something, I just want to see how far round the wrap goes.

Any idea on a price for a full wrap?


Hi Ian,

Unfortunately I don't have any pictures with the door open but I can tell you that on this particular car we did not wrap the door shuts, we didn't think it was necessary as it's a black car. However it can be done, it's quite a time consuming process to make sure the carbon weave all matches up though so I'm not sure we would be able to do it for the same price. The RS4 in these pictures would have cost £1950 inc VAT.

Cheers,
K



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:36 pm 
Z Veteran
User avatar

Joined: Thu Jul 10, 2008 3:38 pm
Posts: 1098
Location: Dublin/Ireland
do you have a direct link to the photo bucket?



_________________
I want to go fast...

Image
WHP: 265.4 / FHP: 318 (+-5% on WHP) : Torque: 318.5 lb/ft
03 JDM : Magnaflow End pipes : Custom 2.5*2 Dual from Cats : BERK racing cats
HALTECH Platinum ECU 350Z : Uprev (De-limiter & 100% throttle) : Kinetix Velocity Manifold : Apexi drop in filter
Offline
 Profile  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:38 pm 
Z Dedicated
User avatar

Joined: Thu Jun 04, 2009 11:47 am
Posts: 241
Location: Wakefield, West Yorlshire
Never seen that before! That looks truly awesome! B)

But I would never have the b@lls to do it :lol:



_________________
ImageImage

ZEDICATED :teeth: UK GT, Gun metal, Alezan Leather, Bose, Xanavi, Rays, Billet Grille, Front 20mm spacers, Rear 25mm, Z centre caps
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:41 pm 
Moderator
User avatar

Joined: Mon Apr 09, 2007 8:48 pm
Posts: 15402
Location: Lakes
Thats some very impressive work bud. :thumbs:



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 12:53 pm 
Moderator
User avatar

Joined: Mon Apr 09, 2007 8:48 pm
Posts: 15402
Location: Lakes
And welcome to the forum as an official trader :thumbs:



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 1:11 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
andlid wrote:
:teeth: there, my mod sorted.

How long does that take from the time I hand in my Z until I can come back and pick her up? What state does it need to be before you start wrapping it?

What warranty comes with it? Is it 'easy' to get it repaired if broken? Looks the part!

Well done! :thumbs:


Hi mate,

You would need to leave the car with us for at least two days (3 if you can).

We give a 1 year warranty on this product providing it's well looked after (Care instructions will be issued at the time of purchase). We expect the wrap to last 3years before it begins to peel or shrink back at all. At that time you just need to bring it back for a tidy up.

We would clean the can down with special solvents when the vehicle arrives. This will not damage the paint in any way! ;)

Cheers,
K



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 1:12 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
martinmac wrote:
And welcome to the forum as an official trader :thumbs:


Thanks Martin. :thumbs:



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 1:15 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
clarkie34 wrote:
Is the carbon only available in the matt finish?


Hi Clarkie,

At the moment, yes. There is a gloss product on the market but it looks no where near as realistic as this. We are testing ways to get a gloss effect with this product but there is nothing on the market thus yet.

Cheers,
K



_________________
Image
Offline
 Profile Personal album  
 
 Post subject: Re: Carbon Fibre Wraps from RGVA
PostPosted: Tue Sep 22, 2009 1:22 pm 
Z Hopeful
User avatar

Joined: Fri Jul 31, 2009 10:55 am
Posts: 71
Location: Kent
Here's a pic of the belly pan of my R6 wrapped in the same material...

Image

Image



_________________
Image
Offline
 Profile Personal album  
 
Display posts from previous:  Sort by  
 Page 1 of 5 [ 65 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: